Before you reboot the system, in the Control Panel, double-click the Modems icon. If this fails, the modem attempts to connect in MNP mode. This command displays one or more lines of information text, identifying the manufacturer of the modem. For modulations that support only a fixed bit rate such as V. Avoid touching any components or connectors on the card.

Uploader: Kazrall
Date Added: 27 June 2010
File Size: 40.43 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 93828
Price: Free* [*Free Regsitration Required]

The default xircom mpci modem 56 2 seconds, but any value from zero to 65 is acceptable. If it is used with another AT command, its function will be ignored. The following sections describe these menus in detail.

Xjrcom the check mark under Device Usage. This causes the modem to hang up go on-hook for about 0. Adhesive labels specified by assembly drawing or instruction may be used as directed. The following table shows the S36 and S48 configuration settings needed to negotiate certain types of connections. The list of codes below includes countries xitcom by this product at time of publication, omdem not all countries listed are xircom mpci modem 56 by this product.

A profile is a named set of configuration parameters that can be recalled. When you first start the Configuration Utility, this menu is displayed.

DriverMax – Modem – XircomInc – Xircom MPCI Modem 56 Drivers Download

O2 This setting issues a rate negotiation command before returning to online data mode. Z0 Disconnect and reload the profile contained in storage location 0 as the active configuration profile.


Xircom Inc makes no representations or warranties jodem respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or xifcom for any xircom mpci modem 56 purpose. This subparameter xircom mpci modem 56 the following values: Replace the battery pack. Note that your submission may not appear immediately on our site.

Some countries do not allow busy detect or dial tone detect to be disabled. Nn Negotiation of Handshaking Options The ATNn command, where n represents xirvom or xircom mpci modem 56, determines whether or not the sending modem performs a negotiated handshake when the speed of the answering modem is different from that of the sending modem. Register S10 will accept a value ranging from 1 to in tenths of xircom mpci modem 56 second 0. The Profile field lets you set values for all parameters by selecting a previously defined profile.

When you power up the computer, the Microsoft Windows Operating System will recognize the new hardware. X1 Result codesand 10 enabled. COM2 serial port and use the default settings.

XircomInc Xircom MPCI Modem 56 driver download and installation

Do not remove protective coverings from the card. The value zircom register S11 has no effect on pulse dialing. Insert a pause before and after the escape sequence to prevent misinterpretation of the escape sequence as data. This profile can be restored at any time by using the ATZ command or a power-up reset of the modem.


Use S-Register S12 to xircom mpci modem 56 the length of the pause.

Do not cut, tear, pierce or remove the xircom mpci modem 56 tape on the card. M2 Speaker always on when modem is off-hook. The Configuration Utility xircom mpci modem 56 a Windows application that allows the user of a computer equipped with a adapter to configure the adapter and to display the current configuration for the adapter.

After installing the Mini PCI card, do not turn the computer on until the card cover has been closed and secured.

Xircom 10/ EtherJet Mini PCI Adapter with 56K Modem – ThinkWiki

As you type, the Configuration Utility uses an algorithm to generate four keys used for encryption. This command displays one or more lines of information text, identifying the revision level of the firmware of the modem. The modem must be in command mode when any command other than the online escape sequence is xircom mpci modem 56.